Making a Call While Scanning
1. Press the PTT key to transmit.
The channel that is called depends on the way your radio has been programmed.
The possible options are:
• your radio calls a predetermined channel, e.g. the dispatcher
• your radio calls the channel where activity was lastdetected
• your radio calls the last free channel.
2. When the called party responds, proceed with yourconversation.
Suspending a Channel From a Scan Group
If a group member is busy for a long time and you do not want to hear the conversation, you may be able to use the
function key programmed for nuisance delete to temporarily delete the group member. When the scan group is next
selected, or after the radio has been turned off and then on, the deleted member is again part of the scan group.
To temporarily remove a captured group member from the scan group:
• Press the function key programmed for nuisancedelete.
If the channel has been removed successfully, the message Channel nuisance deleted appears in the dis-
play.
The function key programmed to activate scanning may be programmed so that a short key press
activates scanning and a long key press activates nuisancedelete.
Editing a Scan Group
Selecting a group to edit
1. Press Menu and select Radio settings > Functions > Advanced > Edit groups. The Edit Groups
menu lists all scan groups programmed for your radio.
Depending on how your radio is programmed, youmay be able to press a function key or use your
Quick Access menu to select the Edit Groups menu.
2. Scroll to the group to be viewed or edited, press Select.
3. In the Edit Group menu, select from the following options:
• Group members: shows the current members of a group, and may also show the designated
transmit channel and priority channels.
61
Tait International Ltd July 2021
To Next Page
Loading...
Need help?
General
