8 P25 Services
This section describes the P25 services that may be available on your radio.
This feature is controlled by a software license (SFE) and may not be available with your radio.
This section covers:
Call Alert
Messages
Radio Check
Radio Inhibit and Uninhibit
Radio Unit Monitor
Status Request
Status Update
Call Alert
You can let another radio user know that you want to talk to them by sending them a call alert page. When the other
radio user receives the call alert page, they can call you back when it is convenient.
If you are on a P25 trunk channel, you can send a call alert to any other radio on a trunk channel on the same network.
If you are on a P25 conventional channel, you can send a call alert to any other radio on the same conventional chan-
nel.
To send a call alert page:
1. Press Menu and select Services > Call alert.
2. Select the radio you want to page.
3. Press Sendto.
A message appears in the display.
The LED glows red and a message may be displayed to advise you whether the call alert has been sent successfully
or not.
If an acknowledgement is not received from the recipient’s radio, you will have the option of either canceling or resend-
ing the request.
Answering a call alert page
If you receive a call alert page from another radio user, the message Page rx’d from... briefly appears in the display.
64
Tait International Ltd July 2021
To Next Page
Loading...
Need help?
General
