1. In the Radio settings menu, select Editgroups and select a scan group. Press Select.
2. In the Edit Group menu, select Delete channel and press Select. A list of group members that are able
to be deleted appears.
3. Select the channel you want to delete and press OK.
For all types of scanning except standard scanning, if the radio is programmed to use the scroll keys
to scroll through a list of channels and also has a function key programmed to Nuisance Delete, you
can permanently add or delete a channel to the active group by scrolling to the channel and pressing
the Nuisance Delete function key.
Changing a group’s transmit channel
The group’s transmit channel can only be changed if it has been pre-programmed.
1. In the Radio settings menu, select Editgroups and select a scan group. Press Select.
2. In the Edit Group menu, select Change tx and press Select.
The current transmit channel is highlighted at the top of the list.
3. Select the new transmit channel and press OK.
The transmit channel remains changed even after the radio is turned off.
Changing a group’s first or second priority channel
1. In the Radio settings menu, select Editgroups and select a scan group. Press Select.
2. In the Edit Group menu, select Change P1 or Change P2 and press Select.
The current priority channels are highlighted at the top of the list.
3. Select the new priority1 or priority2 channel and press OK.
63
Tait International Ltd July 2021
To Next Page
Loading...
Need help?
General
