8 TS-350i USER GUIDE
PERSONALIZING YOUR PHONE
HOW TO NAVIGATE THROUGH MENUS
To access the configuration menu:
• Press the button.
To select an item:
• Dial the digit associated with the menu item or
•Use the Down softkey to move the cursor to the next item, then press the Select softkey to select
an option.
The bottom line of the display shows three softkey functions at a time. Additional softkey functions are
available when the More softkey appears.
To return to a previous branch in the menu, press the Back softkey, or the button.
To exit the configuration menu, press the button.
ENTERING VALUES WITH THE DIAL PAD AND SOFTKEYS
Use the dial pad to input numbers, letters, special characters, and a period. The Mode softkey displays to
indicate a parameter can accept an alphanumeric entry. Selecting the Mode softkey switches the dial pad
mode. The dial pad mode displays in the right of the LCD above the softkeys as for numeric, for
upper case characters, for lower case characters and for special characters.
To enter characters with the dial pad, use the digit with the desired character. Press the same digit
repeatedly until the desired character appears in the LCD. After entering a character, pause to allow the
cursor to move to next character position.
Other special entries include:
• To enter a period or dot (for example, to input an IP address), press * on the dial pad.
• To delete a letter in front of the cursor, press the softkey.
• To clear an entire string, press the Clear softkey.
• To enter a space, press # on the dial pad.
Prior to saving an entry, you may discard changes by pressing the button to move to the previous
menu, or press the button to exit the Settings menu.
SETTING A HUNT GROUP AS AN ACCESS CODE PREFIX
If you need to dial 9 or 81–88 to access an outside line, then you will want to program your phone to
automatically insert a hunt group number before all calls placed from the Missed and Received call logs as
well as from the Phone Book.
To set an Access Code:
• Press the button.
• Press 4 to enter the Call Preferences menu.
• Press 8 to enter the Access Code Prefix menu.
• Enter the hunt group you normally use to place outgoing calls (example: 9), then press the OK softkey.
To Next Page
Loading...
