38 TS-350i USER GUIDE
Line Based Parameters
• Proxy Address: The IP address or FQDN of the phone system, SIP server or SIP proxy.
• Proxy Port: The server port for incoming SIP requests and outgoing responses.
• Display Name: The name used for outgoing Caller ID. The display name assigned for Line 1 also
displays on the LCD display when idle.
• Name: The name (phone number) used during registration. The name is generally the telephone
number or the SIP user ID assigned by the administrator or service provider.
• Authentication Name: The user ID for authentication of the line with the phone system or SIP
server/service.
• Authentication Password: The password for authentication of the line with the phone system or SIP
server/service.
• Line Type: The type of line. Private, Shared (BLA), or DSS line.
• BLA Primary Address: If the line is set to BLA, enter the IP address or FQDN of the server providing
BLA status to the phone.
• Extension for DSS: The extension number associated with the line when the type is DSS. Do not enter
an extension number unless the Line Type is set to DSS.
• Ring Type: Sets the ring tone for incoming calls on the line. The Ring Type can be Set as Default,
Ringer Off or Ring type 1 to 4, 101 to 105 or 201 to 205. The default ring is configured under the
Phone Settings menu.
• Delayed Ring: Delays the audible notification (ring) for a line. The delay is set in 1-second increments
from 0 (no delay) to 10 seconds.
• Auto Answer: If enabled, the phone will automatically enter speakerphone mode for incoming calls
on this line.
• Registration Status: Shows the registration status of the phone. Refresh the page if it doesn’t match
the status indicated on the phone.
General Parameters
• Outbound Proxy Address: The IP address or FQDN of the outbound proxy server to receive SIP
requests in place of the line-based Proxy Server.
• Outbound Proxy Port: The port of the outbound proxy server.
• Backup Proxy Address: The IP address or FQDN of the backup proxy server, used when the connection
with the primary proxy times-out.
• Backup Proxy Port: The port of the backup proxy server.
• Domain: The domain for SIP service when the service provider desires to use a specific SIP domain.
• VMS Address: The address (IP or phone number) of the Voice Mail Server.
• Proxy Registration: Enables SIP registration to the proxy. This parameter is ignored if an Outbound
Proxy Address is not defined.
• Registration Timer: Sets the interval (in seconds) between SIP registration renewal attempts.
• Local UDP Port: The UDP port used on the LAN for sending and receiving SIP packets.
• Local TCP Port: The TCP port used on the LAN for sending and receiving SIP packets.
• Local TLS Port: The TLS port used on the LAN for sending and receiving SIP packets.
• TCP Port: The TCP port used on the LAN for sending and receiving SIP packets.
• TLS Port: The TLS port used on the LAN for sending and receiving SIP packets.
• Transport Mode: The packet transport mode for voice traffic. UDP is most widely used by most
services. TalkSwitch phone systems use UDP.
To Next Page
Loading...
