66 TS-350i USER GUIDE
Conference call
Press the More softkey then press the Conf. softkey to put the first party on hold. Call the second party
(for external calls, first access an outside line). Press the Join softkey to connect to all parties.
Park a caller
Press the programmed Park key. Otherwise, press the button + *510 + #. The system will respond
with a parking orbit.
Retrieve a parked caller
At the dial tone, press the programmed UnPark key, then dial orbit + #. Otherwise, dial ** + orbit + #.
Two-way intercom/group paging to TalkSwitch phones
Press the programmed Intercom or Group Page key + extension + Dial softkey. Otherwise dial *84
(Intercom) + *85 (Paging) + extension + #.
PA overhead paging
Press the programmed Overhead Paging key, or dial *0 + #.
Attach account code to last call
At dial tone, dial *88 + #. When prompted, enter <Account code> + #.
CDR logging must be active.
VOICEMAIL
Access Mailbox — Locally Press the Vmail softkey.
Access Mailbox — Remotely Press ** + <mailbox number>
Change greeting options Dial 2
Change personal options (password, date stamp, remote notification options) Dial 3
MESSAGE PLAYBACK CONTROLS
Rewind 10 seconds Dial 1
Go to beginning Dial 1 1
Skip ahead 10 seconds Dial 3
Skip to end of message Dial 3 3
Check time and date stamp Dial 5
Forward message Dial 6
Delete message Dial 7
Save message Dial 9
Skip to next message Dial #
UPDATING THE FIRMWARE
Updating the firmware on the phone can be done two different ways — direct via the Internet or using
the IP Phone Update Utility.
Checking for Updates
From the phone,
• Press the button.
• Press 8 to enter the Information menu.
• Press the Up softkey.
• Take note of the F/W version.
• Go to http://www.talkswitch.com/support to check for the latest updates.
S
S
S
S
To Next Page
Loading...
