EVERY CALL COUNTS 59
• When done making changes, press the Save button.
LOAD DEFAULT
The Load Default page provides an option to return the phone configuration to factory default values.
To set the phone to the default configuration:
• Select the Load button. Note: All settings will be lost!
• The phone will load the default configuration and automatically reboot.
REBOOT
To reboot the phone:
• Select the Reboot button.
• The phone will reboot.
Modifications made to the IEEE 802.1p/Q configuration require a reboot of the phone.
If CDP is enabled, manual VLAN settings are overwritten during a reboot of the phone. To use manually defined
VLAN settings, disable CDP.
To Next Page
Loading...
