EVERY CALL COUNTS 55
• DST (Daylight Savings Time): Enable DST if applicable in your region. Ensure DST configuration
parameters are properly configured for the start and end of the DST cycle.
• Time Format: Sets the format of the LCD time display. Options include: Off, 12-hour or 24-hour.
• Date Format: Permits the configuration of the date format as will be shown on the LCD of the phone.
• DST Configuration: If DST is enabled, then rules for when it is engaged and disengaged need to be
configured. DST can be configured to start and end on specific dates or switch according to a day of
the week in a certain month (typically used in North America).
Known public SNTP servers that can be used:
— ntp.nasa.gov
— clock.via.net
— tick.ucla.edu
— time.nrc.ca
• To modify parameters on the Network Time screen, select the desired parameter and enter new values
or select values from the drop-down menus. When complete, press the Save button.
To Next Page
Loading...
