Tascam 388 Studio 8 - Features and Controls

FEATURES AND CONTROLS
O POWER
The POWER switch ¡s on the back panel. The
AC valué of your Studio 8 should be checked
for compatibility with your courvtry's AC.
See the Voltage Conversión section of this
manual.
INPUT
MIC .UNE RMX
OI. ^
MAIN MÍX SYSTEM
O MIC IN Connectors
Located on the back panel, these XLR
connectors accept balanced microphone or Une
signáis. High impedance, unbalanced micro
phone signáis may be connected here using a
standard quarter-inch to XLR adapter/trans-
former.
Pin assignment is as follows: Pin 3 is high, pin
2 low and pin 1, shield.
0 LINE IN Connectors
Located on the back panel, these quarter-
inch phone jacks accept unbalanced, line level
signáis. Electronic instruments and audio
equipment producing line level signáis can be
connected here.
lEQ
lAUX
POST
JD. PRE
□
EFF I
lUNUFACIUREDUNDEn db. llCtNSt
POWEII
©
©
©
©
kCCttt
ACCttt
Accrsi 1 «CCCS9 1 Acciss i accim
ACCft»
«ce»»
*CV MNO
1 I
©
©
I
S'
iiivr IN
o (o) (
) @ o
láH OuT
oi) (
tm owT
@ 0 0 (o) 1 (0) 0
0@ (
fiȒ (xrr
i (0) o
w ytc w
WlC ••• 1 W< M
úA\
HiC •••
o
D
B 1 Q □ Q i B
D
©
©
©
0
0
-O
0
-0
' □ s
©
-26-