Tascam 388 Studio 8 - Accessories ^9

accessories
AQ-65 Auto Locator
□i-a-Q
^ I»I ■ I ►
The AQ-65 ¡s a programmable multipoint
locator that allows computer-precision transport
control from a distance. It features among other
capabiüties: ten digit keys for writing cue times
Into memory, pre-roll {19sec. max.}, two-point
repeat (between TAPE TIME and LOCATE
time points) and a duplication of the Studio
8's transport control.
RC-30P Remote Pedal
The RC-30P is a durable footswitch that con-
nects to the PUNCH IN/OUT REMOTE jack
on the front panel of the Studio 8. This permits
"hands free" entry and exit from the record
mode.
SPECIFICATIONS
Description
Function
Transport:
1 ransport:
Auto locator
PLAY, STOP, F. FWD, REW,
spooling and RECORD
{Spooling does not function
with the Studio 8.)
Cue programming
and location: Ten-point (O — 9) memory,
cue point setting with ten
digit keys
RTZ, Return-To-Zero
Counters: 2-Tape Time, Lócate Time
5 digit, hour, minute and
second read-out, with RESET
button
Others
Connecting
Cable:
Dimensions
(W X H X D)
Weight
8 m, 34-core shielded, with
38 pin (MALCO 354 or
ELCO 8016 Series)
432 X 88 X 125 mm
(17" X 3-7/16" X 4-15/16")
5 kg (11 Ibs), including cable
1 . r
f ]d] [" ""^1a
J'ddd ° ELT T T T mJ
RC-71 Remote Control Unit
This unit makes remote control of the transport
functions possible. it plugs into a multipm
connector on the rear of the Studio 8.
E-3 Demagnetizer
The E-3 is essentíal for eüminating the residua
magnetism that builds up on the heads, as we
as other metal parts along the tape path. De-
magnetization is part of regular recorder main-
tenance, and the TEAC E-3 is the right tool
for the job.