8. Cleaning and Maintenance
2016-04 IFU for Infinite 200 PRO No. 30052730 Rev. No. 1.6 183
8.4.7 Disposal of the Instrument
Please contact your local Tecan service representative before disposing of the
instrument.
CAUTION
ALWAYS DISINFECT THE INSTRUMENT BEFORE DISPOSAL.
Pollution degree
2 (IEC/EN 61010-1)
Method of disposal
Contaminated waste
WARNING
DEPENDING ON THE APPLICATIONS, PARTS OF THE HYDROFLEX
PLATFORM MAY HAVE BEEN IN CONTACT WITH BIOHAZARDOUS
MATERIAL.
• MAKE SURE TO TREAT THIS MATERIAL ACCORDING TO
THE APPLICABLE SAFETY STANDARDS AND
REGULATIONS.
• ALWAYS DECONTAMINATE ALL PARTS BEFORE DISPOSAL
(I.E. CLEAN AND DISINFECT).
STOP
To Next Page
