Techkon SpectroDens User Manual

64
Manual TECHKON SpectroDens
When the solid density is measured, the com-
pliance with the tolerances is checked.
In this example the measurement has been
taken on a black solid patch.
At the same time the recommendation how
to adjust the density is calculated.
The smallest possible ∆E*-value is calculated
in advance.
The measurement function ISO-Check recog-
nizes, whether the given tolerances can be
achieved with the set of print ink in use. If this
is not the case, another set of print ink must
be used.

Techkon SpectroDens Specifications

General

Brand	Techkon
Model	SpectroDens
Category	Measuring Instruments
Language	English