Techkon SpectroDens User Manual

65
CHAPTER 2 – Measurement functions
After the measurement of the solid patch, you
can measure the %-patch, which you have
dened in the setup.
The dot gain is checked in regard to its con-
formity to the ISO-standards.
Concerning the midtone the spread will be
displayed additionally (CMY).
The deviation of the colors CMY is allowed to
reach ± 4 % in the middle-tone of 40 % per
ink .
But to avoid that the gray balance is disturbed
too much, the spread limits the permitted dif-
ference between the highest and the lowest
tonal value to 5 %.

Techkon SpectroDens Specifications

General

Brand	Techkon
Model	SpectroDens
Category	Measuring Instruments
Language	English