28
Uk
It Fr De Nl Es Br
日本語
中文
Irregular noise from
motor area
Treadmill not centrally aligned.
Align the treadmill.
Problems in monitoring
heart rate with the chest
band
Other transmitters situated nearby.
Move the equipment far enough away to stop signal
interference (minimum distance between two units 80
cm), or use the hand sensor.
Strong interference sources nearby.
Find the interference source (e.g. an electrical domestic
appliance) and move it away, or move the equipment.
Worn heart rate monitor chest band.
Change the chest band.
Chest band transmitter not making proper skin
contact.
Dampen the inside of the chest band with water.
Control panel not working properly.
Contact the Technogym Technical Support Service.
Damaged transmitter.
Change the chest band.
Too noisy Equipment not properly levelled.
Check the position and level the rear adjustment feet.
Damaged bearings.
Contact the Technogym Technical Support Service.
Worn belt.
Contact the Technogym Technical Support Service.
0SM00427AE-M1_UK.indd 28 02/07/2010 9.49.39
To Next Page
Loading...
