32
Uk
It Fr De Nl Es Br
日本語
中文
To turn the equipment off, switch the
main switch to the “OFF” position (0).
The ON (I) / OFF (0) positions may vary
according to the equipment version. The
correct positions are given on the label
on the equipment.
The equipment must be switched off
only at the end of the exercise, when
in standby.
If the equipment isn’t going to be used
for a long time, as well as turning it off
you should also pull the plug out of the
wall socket.
The switch is for turning the
equipment on and off but does
not isolate it completely from
the mains voltage, even in the
“OFF” (0) position. For complete
isolation you must unplug the
power supply plug.
03056007
03056012
0SM00427AE-M1_UK.indd 32 02/07/2010 9.49.39
To Next Page
Loading...
