TOP 600 XTPRO: Service & Maintenance Manual - rev. 2.0
8.5. PLAY OF SADDLE STEM
For the IFI machine refer to chapter 12. “TOP 600 XTPRO IFI”
Figure 8.5-1
Carry out the procedure described in paragraph
7.14. “Disassembling the saddle and stem
guard”.
For all the screws:
1. Loosen the stop nut a using a 17-mm
wrench.
2. Adjust the amount of play by means of the
adjusting screws, using a flat-head
screwdriver.
3. After completing the adjustment, lock down
what previously backed off.
Page 8.5
To Next Page
Loading...
