To Next PageTo Next PageWhat to do if Technomark M4 inline shows error code 8?
If the Technomark Label Maker displays error code 8, it could be due to damage to the striker unit cable, the striker unit connector, or the marking head cable. Check the condition of these cables and the connector, then restart the controller. If the problem continues, further assistance is needed.
What to do if Technomark M4 inline Label Maker displays error 50?
If the Technomark Label Maker shows error code 50, a temperature error, turn the controller off for about ten minutes, then restart it. If the issue persists, try reducing the number of impacts by using a different font, reducing the marking speed, or reducing the marking force.
What to do if Technomark M4 inline Label Maker displays error code 2?
If the Technomark Label Maker displays error code 2, which indicates a file error, restart the controller. If the issue persists, recreate the file and delete the corrupted one. Also, consider deleting unnecessary files to free up space.
What to do if Technomark M4 inline Label Maker displays error code 14?
If the Technomark Label Maker shows error code 14, indicating an X and Y origin error, check that there is no object blocking the trajectory of the striker unit and restart the controller.
What to do if Technomark Label Maker displays error code 16?
If the Technomark Label Maker displays error code 16, indicating a Y origin error, check for any external objects blocking the striker unit's trajectory and restart the controller. Also, ensure the detection pin Y is not twisted, preventing it from passing through the sensor; then restart the controller.
What to do if Technomark M4 inline displays error code 15?
If the Technomark Label Maker shows error code 15, which is an X origin error, check for any obstructions blocking the striker unit's path and restart the controller. Also, verify that the detection pin X is not twisted, preventing it from passing through the sensor; then restart the controller.
What to do if Technomark Label Maker shows error codes 43, 44, 45, 46?
If the Technomark Label Maker gives error codes 43, 44, 45, or 46 related to USB stick errors, try using a different USB stick. If that doesn't work, restart the controller.
What to do if Technomark M4 inline Label Maker displays error code 10?
If the Technomark Label Maker displays error code 10, which indicates a weak current, check the condition of the striker unit cable and restart the controller. Also, inspect the striker unit connector, ensuring it's properly connected, and then restart the controller.
What to do if Technomark M4 inline displays error code 9?
If the Technomark Label Maker displays error code 9, it signifies an open circuit. You should check the condition of the striker unit cable, ensuring it is not cut or damaged, and then restart the controller. Also, inspect the striker unit connector to confirm it is undamaged and properly connected before restarting the controller. Additionally, verify the condition of the marking head cable and restart the controller.
What to do if Technomark M4 inline Label Maker displays error code 13?
If the Technomark Label Maker shows error code 13, it means there's no marking head detected. Ensure the head is correctly connected and the connector is locked, then restart the controller. Inspect the cable's condition. Also, check for any obstructions blocking the striker unit's path and restart the controller. If needed, power off the device and manually check if the machine can move to its original position freely.
General| Brand | Technomark |
|---|---|
| Model | M4 inline |
| Category | Label Maker |
| Language | English |
