14 or 15 hexadecimal digits expressed using ASCII characters. Only
the first 14 digits of the IMEI are stored and displayed on retrieval.
Values:
The IMSI(s) to be associated with an IMEI.
imsi
5 to 15 hexadecimal digits expressed using ASCII characters. Up to 8
IMSIs can be provisioned for an IMEI.
Values:
all - used to remove all IMSIs associated withan IMEI.
(Optional) Specify the number of seconds to wait for the write transaction if another
connection already has it. Clients waiting for the write transaction with this mechanism
timeout
are processed in the order that their requests were received. This option is only allowed
if the client used the txnmode single option on its connect request.
0 (return immediately if not available; default)
Values:
1 - 3600 seconds
Request syntax:
dlt_eir([iid xxxxx,]imei XXXXX, imsi XXXXX[,….,imsi XXXXX])
Delete the IMSI from all IMEIs
This command is used to delete the IMSI from all IMEIs. This is the EIR specific IMSI, not the
G-Port/G-Flex IMSI.
The dlt_eir command is used to delete the IMSI from all IMEIs.
Parameters :
The IMSI(s) reference to be deleted from the IMEI.
imsi
5 to 15 hexadecimal digits expressed using ASCII characters. Up to
8 IMSIs can be provisioned for an IMEI.
Values:
(Optional) Specify the number of seconds to wait for the write transaction if another
connection already has it. Clients waiting for the write transaction with this mechanism
timeout
are processed in the order that their requests were received. This option is only allowed
if the client used the txnmode single option on its connect request.
0 (return immediately if not available; default)
Values:
1 - 3600 seconds
127
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
