1 to 15 hexadecimal digits expressed using ASCII characters.
Values:
none – Sets the rn to not point to any network entity.
(Optional) Additional Subscriber Data to be associated with the DN Block. Leading zeros
are significant.
asd
1 to 10 hexadecimal digits expressed using ASCII characters. Leading
zeros are significant.
Values
none – Removes additional subscriber data from the DN.
(Optional) The subscriber type for created DNs.
st
A decimal number in the range
Values
0 - public
1 - private
A TIF NS DN (specified in international format).
nsdn
Values:
a string with 5 to 15 characters where each character must be a number from 0 to F.
(Optional) IDP calling party blacklist.
cgbl
no - IDP calling party blacklist is disabled.
Values
yes - IDP calling party blacklist is enabled
(Optional) IDP called party blacklist.
cdbl
no - IDP called party blacklist is disabled.
Values
yes - IDP called party blacklist is enabled.
(Optional) Specify the number of seconds to wait for the write transaction if another
connection already has it. Clients waiting for the write transaction with this mechanism
timeout
are processed in the order that their requests were received. This option is only allowed if
the client used the txnmode single option on its connect request.
0 (return immediately if not available; default)
Values:
1 - 3600 seconds
Rules :
1.
It is not valid to create more than 2 Network Entity associations.
78
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
