2. The DN given by nsdn must exist.
3. Cannot update a DN to have the 2 Network Entities asd and nsdn together.
Request syntax :
Upd_sub([iid XXXXX,] dn XXXXX, [pt <none/0/1/2/3//….35>,] [st <0/1>,] [nsdn XXXXX,]
[sp XXXXX,] [rn XXXXX,] [vms XXXXX,] [grn XXXXX,] [asd XXXXX,] [cgbl <no/yes>,]
[cdbl <no/yes>,] [timeout <0..3600>])
Move an existing DN to an Existing IMSI
This command is used to move an existing DN to an existing IMSI. The DN is changed to use the SP
of the IMSI.
If the DN is already associated with an IMSI, it will be removed from that IMSI and associated with
the new IMSI. The original IMSI will not be removed, even if this results in it having no DNs associated
with it.
If the DN is already associated with a vms or grn, those NE associations will be removed when the
DN is moved to the specified IMSI. IMSIs and DNs on IMSIs can only be associated with 1 NE.
Parameters :
A single DN (specified in international format).
dn
5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
A single IMSI.
imsi
5 to 15 hexadecimal digits expressed using ASCII characters.
Values:
(Optional) Specify the number of seconds to wait for the write transaction if another
connection already has it. Clients waiting for the write transaction with this mechanism
timeout
are processed in the order that their requests were received. This option is only allowed
if the client used the txnmode single option on its connect request.
0 (return immediately if not available; default)
Values:
1 - 3600 seconds
Request syntax :
upd_sub([iid XXXXX,] dn XXXXX, imsi XXXXX
[, timeout <0..3600>])
Modify the Subscription Information for a DN Block
This command modifies the subscription data for a DN block. The block specified must exactly match
an existing block. It cannot span multiple blocks or into unused DNs. It cannot be a subset of an existing
block
79
910-6022-001 Revision A, March 2011
PDBI Request/Response MessagesProvisioning Database Interface Manual
To Next Page
Loading...
