88
Phaser 740 and 750 Color Printers
Recommended tools
■
Toner vacuum cleaner
■
Suction bulb (air blower)
■
Cleaning water
■
Lint-free wipes
■
Cotton swabs
■
Imaging unit cover
■
Isopropyl alcohol (greater than 90% pure)
Cleaning
1.
Turn off the printer.
2.
Remove the imaging unit and immediately cover it to protect it from the
light.
3.
Remove the toner cartridges.
4.
Remove the fuser.
5.
Remove the paper tray.
6.
Slide out the paper feeder.
7.
Clean the accumulator belt home position sensor with a dry cotton swab.
8.
Clean all printer rollers, except the second bias transfer roller, with alcohol-
dampened wipes only. Never apply alcohol on the second bias transfer
roller.
9.
Clean the laser window with puffs of air from the suction bulb. Alternately,
you can vacuum the window clean.
10.
Wipe off the pre-exposure lamp bezel and the pre-transfer lamp bezel with a
lint-free wipe.
11.
Vacuum out the interior of the printer.
To Next Page
Loading...
General