86 Phaser 740 and 750 Color Printers
Calibrate for paper (Phaser 750 only)
The Calibrate for Paper menu adjust the printer for the grade of non-Tektronix paper
being printed on, as well as compensate for the current environmental conditions.
This adjustment applies only to Standard and Enhanced mode printing; Premium
mode is not affected by this adjustment. You may have to readjust the printer if you
switch to a different brand or grade of paper or if the temperature or humidity
changes significantly. The difference created by this calibration function may not be
apparent for prints made when the relative humidity is over 20%.
1. Press the Help button on the front panel to scroll the Print Quality menu.
2. Scroll to the Calibrate for Paper menu item and press Print. The printer
will print out 11 test pages.
3. Look at each of the 11 References Pages printed by the printer. Each prints
with a different transfer setting: (-10, -8, -6, -4, -2, 0, +2, +4, +6, +8, +10).
4. After deciding which page looks best on your brand or grade of paper, enter
in the front panel menu Adjust Transfer Setting the transfer setting
value (-10 to +10) of the page that looks best.
The Calibrate for Paper test page
Phaser
750 Color Printer
Calibrate for Paper
The
Calibrate for Paper
menu
helps you adjust the printer for the grade of non-Tektronix paper you print on, as well
as compensate for the current environmental conditions. This adjustment applies only to Standard and Enhanced
mode printing; Premium mode is not affected by this adjustment. You may have to readjust the printer if you switch
to a different brand or grade of paper or if the temperature or humidity changes significantly.
Step 1.
Review each of the Reference pages.
Look at each of the 11 References Pages printed by the
printer. Each prints with a different transfer setting:
(-10, -8, -6, -4, -2, 0, +2, +4, +6, +8, +10).
Step 2.
Select a Transfer Setting based on your
evaluation of the prints.
After deciding which page looks best
on your paper
, enter
in the front panel menu
Adjust Transfer Setting
the
transfer setting value (-10 to +10) of the page that looks
best.
This page was printed with Transfer Setting = <<<>>
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z abcdefghijklmnopqrstuvwxyz
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z abcdefghijklmnopqrstuvwxyz
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z abcdefghijklmnopqrstuvwxyz
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z abcdefghijklmnopqrstuvwxyz
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z abcdefghijklmnopqrstuvwxyz
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z abcdefghijklmnopqrstuvwxyz
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z abcdefghijklmnopqrstuvwxyz
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z abcdefghijklmnopqrstuvwxyz
To Next Page
Loading...
General