Preface
Returning the Probe f or Servicing
If your probe requires servicing, you must return the probe to Tektronix. If the original packaging is un fit for use or not available, use
the following packaging guidelines:
Preparation for Shipment
1. Use a c orrugated cardboa rd shipping
carton having inside dimensions at
least one inch greater than the probe
dimensions. The box should have a carton
test strength of at least 200 pounds.
2. Put the probe into an antistatic bag or wrap
it to protect it from dampness.
3. Place the probe into the box and stabilize it
with light packing material.
4. Seal the carto n with shipping tape.
5. Refer to Co ntacting Tektronix at the
beginning of this manual for the shipping
address.
TCP0030 C urren t Probe Instruction Manual xi
To Next Page
Loading...
Need help?
General
