Tektronix TCP0030 User Manual

Maintenance
Replacement
Transformer
To replace the transformer, do the following:
1. Gently lift the front edge of t he circuit board
and tra nsformer enough to clear the probe
body.
2. Pull the transformer socket straight off the
circuit board pins.
3. Align the socket of the new tra nsformer to
the circuit board pins and connect them.
4. Seat th e components back in the probe.
72 TCP0030 Current Probe Instruction Manual

Tektronix TCP0030 Specifications

General

Brand	Tektronix
Model	TCP0030
Category	Test Equipment
Language	English