Teletek electronics TTE Combo - Page 38

TTE Combo Communication Module – Installation and Programming Manual
38
SIA
Code
Event Code Description Address Field
RX
Manual Test
Manual communication test report.
User number
SA
Sprinkler Alarm
Sprinkler flow condition exists.
Zone or point
SB
Sprinkler Bypass
Sprinkler zone has been bypassed.
Zone or point
SH
Sprinkler Alarm Restore
Alarm condition eliminated.
Zone or point
SJ
Sprinkler Trouble Restore
Trouble condition eliminated.
Zone or point
SR
Sprinkler Restoral
Alarm/trouble condition has been eliminated.
Zone or point
SS
Sprinkler Supervisory
Unsafe sprinkler system condition.
Zone or point
ST
Sprinkler Trouble
Zone disabled by fault.
Zone or point
SU
Sprinkler Unbypass
Sprinkler zone bypass has been removed.
Zone or point
TA
Tamper Alarm
Opened TAMPER at TTE Combo module (IN1 Terminal).
Zone or point
TB
Tamper Bypass
Tamper detection has been bypassed.
Zone or point
TE
Test End
Communicator restored to operation.
Unused
TH
Tamper Alarm Restore
TAMPER Restored at TTE Combo module (IN1 Terminal).
Zone or point
TP
Walk Test Point
This point was tested during a Walk Test.
Point number
TR
Tamper Restoral
Alarm equipment enclosure has been closed.
Zone or point
TS
Test Start
Communicator taken out of operation.
Unused
TU
Tamper Unbypass
Tamper detection bypass has been removed.
Zone or point
TX Test Report
An unspecified (manual or automatic) communicator
test.
Unused
UA
Untyped Zone Alarm
Alarm condition from zone of unknown type.
Zone or point
UB
Untyped Zone Bypass
Zone of unknown type has been bypassed.
Zone or point
UH
Untyped Alarm Restore
Alarm condition eliminated.
Zone or point
UJ
Untyped Trouble Restore
Trouble condition eliminated.
Zone or point
UR Untyped Zone Restoral
Alarm/trouble condition eliminated from zone of
unknown type.
Zone or point
US
Untyped Zone Supervisory
Unsafe condition from zone of unknown type.
Zone or point
UT
Untyped Zone Trouble
Trouble condition from zone of unknown type.
Zone or point
UU
Untyped Zone Unbypass
Bypass on zone of unknown type has been removed.
Zone or point
UX
Undefined
An undefined alarm condition has occurred.
Unused
UY Untyped Missing Trouble
A point or device which was not armed is now logically
missing.
Zone or point
UZ Untyped Missing Alarm
A point or device which was armed is now logically
missing.
Zone or point
VI
Printer Paper In
TRANSMITTER or RECEIVER paper in.
Printer number
VO
Printer Paper Out
TRANSMITTER or RECEIVER paper out.
Printer number
VR
Printer Restore
TRANSMITTER or RECEIVER trouble restored.
Printer number
VT
Printer Trouble
TRANSMITTER or RECEIVER trouble.
Printer number
VX
Printer Test
TRANSMITTER or RECEIVER test.
Printer number
VY
Printer Online
RECEIVER'S printer is now online.
Unused
VZ
Printer Offline
RECEIVER'S printer is now offline.
Unused
WA
Water Alarm
Water detected at protected premises.
Zone or point
WB
Water Bypass
Water detection has been bypassed.
Zone or point
WH
Water Alarm Restore
Water alarm condition eliminated.
Zone or point
WJ
Water Trouble Restore
Water trouble condition eliminated.
Zone or point
WR
Water Restoral
Water alarm/trouble condition has been eliminated.
Zone or point