Telit Wireless Solutions ME910G1 Design Guide

ME910G1 Hardware Design Guide
1VV0301593 Rev.12 Page 26 of 93 2021-09-24
Not Subject to NDA
Table 13:GPS Mode *reference signal @-130 dbm with static scenario
Note: The reported LTE CAT M1 and LTE CAT NB1 idle mode values
are an average among all product variants and bands for each
network wireless technology.
Support of specific network wireless technology depends on the
product variant configuration.
ME910G1-W1 Connected Mode
Table 14: ME910G1-W1 Connected Mode
Mode
Measure* (Typical)
Mode Description
GPS
(mA)
Active State
(GNSS ON, CFUN=4)
Acquisition
69.3
GPS+GLO, DPO off
Navigation
22
GPS+GLO, DPO on DWELL=280ms
55.9
GPS+GLO, DPO off
Active State
(GNSS ON, CFUN=5
eDRX)
Acquisition
68.5
GPS+GLO, DPO off
Navigation
15.7
GPS+GLO, DPO on DWELL=280ms
54
GPS+GLO, DPO off
Mode
Measure
(Typical)
Mode
Description
Connected mode
Average
(mA)
Peak
(mA)
CATM
180
400
1 RB, RMC, TBS=5, QPSK, 21dBm,
all bands
NBIoT
245
340
3.75KHz, 1 SC, RU 32ms, TBS=0, BPSK, 20dBm, all bands
65
290
15KHz, 12 SC, RU 1ms, TBS=5, QPSK,
21dBm, all bands

Telit Wireless Solutions ME910G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ME910G1
Category	Wireless modules
Language	English