Telit Wireless Solutions ME910G1 Design Guide

ME910G1 Hardware Design Guide
1VV0301593 Rev.12 Page 91 of 93 2021-09-24
Not Subject to NDA
15. DOCUMENT HISTORY
Revision
Date
Changes
12
2021-09-24
Chap 1.2 alignment to ME310 HUG
Chap 1.5 document list updated
Chap 4.3.1.3 change battery peaks of current up to 2A
Chap 5.7.3.1 remove indication of SW flow control in the note
Chap 12.4 added
UCKA reference removed until final approvals from Approved Body UK
Language reviewed
11
2021-08-19
Revision released for certification purpose. Not distributed.
UKCA certification added
10
2021-08-05
Added B86 (US upper 700MHz band) to WW product
Chapter 12, update
9
2021-04-22
Added B8_39d (US 900Mhz band) to W1 and WW products
8
2021-02-22
Section 3.2, LGA pads layout correction
7
2021-02-02
Reviewed template design and styles
Section 2.4, update
Chapter 4, update
Sections 6.1, 6.2, 6.3, removed (redundant)
Section 7.2, removed
Section 8.4, measurements update
Section 2.2, 2.5, 12.3, adding B86 update
6
2020-09-14
Section 2.5, TX Power update
Section 2.8, Temperature range update
Chapter 12, Conformity assessment update
5
2020-07-22
Conformity assessment update with ANATEL
4
2020-06-18
The title of chapter 5.7.3.2 has been changed from "Modem serial port
2" in "Modem serial port 2 (USIF1)".
The title of chapter 5.7.3.1 has been changed from "Modem serial port
1" in "Modem serial port 1 (USIF0)".
In the table of chapter 3.1, the "Asynchronous serial port" section title
has been changed in "Asynchronous serial port (USIF0)".
3
2020-06-10
Conformity assessment update
TX Output Power update
Power Consumption section update

Telit Wireless Solutions ME910G1 Specifications

General

Brand	Telit Wireless Solutions
Model	ME910G1
Category	Wireless modules
Language	English