Telit Wireless Solutions ME910G1 - 11 Packaging; Tray

ME910G1 Hardware Design Guide
1VV0301593 Rev.12 Page 72 of 93 2021-09-24
Not Subject to NDA
11. PACKAGING
Tray
ME910 modules are packaged on trays that can be used in SMT processes for pick & place
handling.The first Marketing and Engineering samples of the ME910G1 series will be
shipped with the current packaging of the xE910 modules (on trays of 20 pieces each).
Please note that Telit is going to introduce a new packaging for the xE910 family, as per
Product Change Notification PCN-0000-14-0055, therefore the mass production units of
ME910G1 will be shipped according to the following drawings:
Figure 31: Tray packaging