Telos Alliance Omnia MPX Node - 16 Specifications; External Power Supply; MPX Node Power Consumption; MPX Node Composite Input;Output

V1.1-OCTOBER 2019
| 54
OMNIA MPX NODE MANUAL
16 Specications
External power supply
(Telos part number 1771-00112-100)
Input 100VAC to 240VAC, 50 Hz to 60 Hz, 1.2A
Output 12VDC, 3.4A
Connector Type: 2.5mm Locking DC barrel. Center positive
MPX Node Power Consumption:
12 watts
MPX Node Composite Input/Output:
Connector Type: Female BNC, EMI Suppressed
Max Cable Length: 100ft (30m) RG-58A/U
Composite Out(Source) Impedance: 5 ohms or 75 ohms selectable
Suggested Load Impedance: >50 ohms (Composite output only)
Composite Input Impedance: >/= 100k ohm
Composite Output Level: 4Vpp or 10Vpp selectable
Composite Input Level: 1Vpp to 10Vpp
Pilot Frequency: 19.000kHz +/- 1.9Hz, 9% modulation
Operating Temperatures
0 degree C to +40 degree C, <90% humidity, no condensation