Tenda AC18 - Page 83

- 78 -
Parameter
Description
Service
Provider
It specifies a DDNS service provider. The supported service providers
include no-ip.com, 3322.org, dyndns.org, 88ip.cn, and oray.com.
User name
It specifies the user name registered on a DDNS service provider's
website for logging in to the DDNS service.
Password
It specifies the password registered on a DDNS service provider's website
for logging in to the DDNS service.
Domain
Name
It specifies the DDNS domain name register on a DDNS service provider's
website.
Connection
Status
It indicates the current status of the DDNS service.
Application Scenario
An AC18 is used to set up a network at an apartment and must be managed remotely using a
web browser. This requirement can be addressed by combining the remote management and
DDNS functions. Assume that the registered domain name is tenda.dyndns.org, the user
name is Tenda, and the password is 1234578.
The following figure shows the application scenario.
Configuration
Step 1 Enable the DDNS function.
1. Set DDNS to the state.
2. Set Service Provider to dyndns.org.
If you do not have a DDNS account, select a service provider and click to go to the
service provider's website. Register a DDNS account and memorize your user name, password,
and domain name of the account.
3. Set User name to your user name for logging in to your DDNS service, which is Tenda in
this example.
WAN IP address of the router:
102.33.66.88
IP address of computer 2:
218.88.93.33