How to fix reduced run time on Tennant T5?
If your Tennant Scrubber has a reduced run time, fully recharge the batteries first. If the issue persists, the batteries may be defective and need replacement.
Why won't the vacuum motor operate on my Tennant T5 Scrubber?
If the vacuum motor on your Tennant Scrubber won't operate, make sure the squeegee is lowered to the floor. Also, ensure the batteries are charged.
How to troubleshoot poor scrubbing performance on a Tennant Scrubber?
If your Tennant Scrubber has poor scrubbing performance, start by removing any debris caught in the brush. If the brushes/pads are worn, replace them. Also, ensure that you are using the correct brush/pad type and adjust the pressure setting accordingly.
What to do if the onboard battery charger will not operate on Tennant T5 Scrubber?
If the onboard battery charger of your Tennant Scrubber won't operate, check the plug connection to the power supply. If the plug is correctly connected, replace the charger fuse if it's faulty. Also, replace the power supply cord if it's faulty.
How to troubleshoot FaST system issues on a Tennant Scrubber?
If the FaST system on your Tennant Scrubber isn't operating correctly, first ensure the FaST system switch is turned on and that the FaST-PAK supply hose is connected. If the hose or connectors are clogged, soak them in warm water to unclog. Replace the FaST-PAK carton if it's empty. Also, check for any kinks in the FaST-PAK supply hose and undo them. Drain the solution tank, remove the solution tank filter, clean it, and reinstall.
General| Power Source | Battery |
|---|---|
| Sound Level | 67 dBA |
| Machine Type | Walk-Behind Scrubber |
| Battery Voltage | 24 V |
| Machine Width | 24 in / 61 cm |
To Next Page
