Maintenance Manual November 2021
Programmed Maintenance Procedures
70 Scissor Lifts Part No. 1305686GT
P0-4
Deutz Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
This maintenance schedule applies to the following engine models:
Note: The following procedures apply to all engine models unless noted otherwise.
Deutz Engines: Hour Intervals
Procedure
Not required
Daily 500
Oil level - check
∅
∅
Oil, fuel and coolant systems - check for leaks
∅
Fuel system filter/water separator – inspect/drain
∅
Air filter discharge valve - clean
∅
Exhaust and after treatment system – check for leaks (D 2.9 L4, TD 2.2 L3)
∅
Engine coolant - test/add (D 2.9 L4, TD 2.2 L3)
∅
Air intake pipes - inspect (D 2.9 L4, TD 2.2 L3)
∅
V-belts - inspect (D 2.9 L4)
∅
Fuel filter / separator - replace (TD 2.2 L3)
∅
Engine oil and filter – replace (TD 2.2 L3)
∅
To Next Page
Loading...
Need help?
General
