Terex Genie GS-1330m Maintenance Manual

November 2021 Maintenance Manual
Programmed Maintenance Procedures
Part No. 1305686GT Scissor Lifts 71
P0-5
Ford Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
Ford MSG 425
Hour Intervals
Procedure
∅ = Not required
Daily 100 200 400 800
Oil level - check
∅ ∅ ∅ ∅
Coolant level - check
∅ ∅ ∅ ∅
Oil, fuel and coolant systems - check for leaks
∅ ∅ ∅ ∅
Air filter discharge valve - clean
∅ ∅ ∅ ∅
Oil, coolant, fuel, exhaust and vacuum hoses - check for leaks, damage or
deterioration
∅ ∅ ∅ ∅
Electrical wiring - check for chafing or damage
∅ ∅ ∅ ∅
Engine belts - check/adjust
∅ ∅ ∅ ∅
Fuel filters - check/replace
∅ ∅ ∅ ∅
Engine oil - replace
∅ ∅ ∅ ∅
Oil filter - replace
∅ ∅ ∅ ∅
Air filter - replace
∅ ∅ ∅ ∅
Spark plugs - clean/adjust/replace
∅ ∅ ∅ ∅
Loose or missing fasteners - tighten/replace
∅ ∅ ∅ ∅
PCV valve - check
∅ ∅ ∅ ∅
PCV hoses, tubes and fittings - clean
∅ ∅ ∅ ∅

Terex Genie GS-1330m Specifications

General

Brand	Terex
Model	Genie GS-1330m
Category	Lifting Systems
Language	English