Terex Genie GS-1330m Maintenance Manual

November 2021 Maintenance Manual
Programmed Maintenance Procedures
Part No. 1305686GT Scissor Lifts 73
P0-7
Kubota Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
This maintenance schedule applies to the following Kubota Engines:
Kubota D-1105-E3B Kubota WG972
Kubota Engines Hour Intervals
Procedure
∅ =
Not required
Daily 50 75 100 150 200
400 500 800
Coolant level - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Oil level - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Oil, fuel and coolant systems - check for leaks
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Fuel system filter/water separator – inspect/drain
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Fuel hoses and clamp bands - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Fan belt tension and damage - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Battery electrolyte level - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Spark plug - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Air cleaner element - clean
(Replace the element after 6 times cleaning)
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Fuel filter (element type) - clean
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Oil filter cartridge - replace,
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Engine oil - replace
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Radiator hoses and clamps - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Intake air line - check, D-1105
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Fuel filter cartridge - replace
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Air cleaner element - replace
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Fan belt - replace
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Cleaning of water jacket (radiator interior)
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Removal of sediment in fuel tank
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Damage in electric wiring and loose connections - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅
Valve clearance - check
∅ ∅ ∅ ∅ ∅ ∅ ∅ ∅

Terex Genie GS-1330m Specifications

General

Brand	Terex
Model	Genie GS-1330m
Category	Lifting Systems
Language	English