Terex Genie GS-1330m Maintenance Manual

Maintenance Manual November 2021
Programmed Maintenance Procedures
74 Scissor Lifts Part No. 1305686GT
P0-8
Perkins Engine Maintenance – Under 1000 Hours
Additional engine maintenance is required. Refer to the Programmed Maintenance Inspection Report for
the specific intervals that apply.
Required maintenance procedures and additional engine information are available in the manufacturer's
manuals. Refer to Specifications, Engine Operator and Maintenance Manuals.
Perkins 403D-11
Hour Intervals
Procedure
∅ = Not required
Daily 50 500
Air filter discharge valve - clean
∅ ∅
Oil, fuel and coolant systems - check for leaks
∅ ∅
Coolant level – check/add
∅ ∅
Oil level - check
∅ ∅
Fuel system filter/water separator – drain
∅ ∅
Engine air precleaner - check/drain
∅ ∅
Alternator belt - inspect/adjust/replace
∅ ∅
Fuel tank water/sediment - drain
∅ ∅
Hoses and clamps – inspect/replace
∅ ∅
Cooling system supplement additive - test/add
∅ ∅
Engine oil and filter – replace
∅ ∅
Fuel system filter(s) - replace
∅ ∅
Radiator – clean
∅ ∅
Air cleaner element - clean/replace
∅ ∅
Fan clearance - check
∅ ∅

Terex Genie GS-1330m Specifications

General

Brand	Terex
Model	Genie GS-1330m
Category	Lifting Systems
Language	English