Stop scanning: stops scanner measurement
Start measure: activates measurement sequence
Stop measure: stops measurement sequence
Upload firmware: permits user to upload firmware on the KT-10 v2 as described in
the section 4.1.8 on page 78.
Upload file: to upload .tar files on the internal memory of the KT-10 v2
Purge Records: permanently deletes records from the unit
The tab:
Read Records: reads all records on the device
Delete record: deletes individual record that is selected by the user
Delete all records: deletes all records on the device
Export data: Exports data set in text format
86
To Next Page
Loading...