NOTE: Be as precise as possible when aligning the bracket
because you will be unable to reposition it once adhered
to the bumper.
5.
While correctly aligned, move the top of the bracket
against the bumper and apply pressure so that it is held in
place by the adhesive.
6. Remove the remaining tape from the sides of the bracket
then press the entire bracket firmly against the bumper,
ensuring the bracket is held in place by all adhesive areas.
7. Once the bracket is securely mounted, use the four
supplied screws to attach your license plate to the
bracket (tighten to 3 Nm/2.2 ft-lbs).
NOTE: Tesla does not recommend using a protective license
plate frame for the front license plate, as it may obstruct the
camera.
Parts and Accessories
188 MODEL Y Owner's Manual
To Next Page
Loading...
