• Press the switch on the outside of each seat. To only fold
the center seat forward, pull the handle on the back of the
center seat.
• Use the controls on the front touchscreen (Controls >
Seats ).
• Use the controls on the rear touchscreen (touch the seat
icon).
•
Press the switch in the trunk.
The switch on the side of each outboard seat has two detents
and functions differently depending on if you are seated or
not.
While sitting, to adjust the angle of the seat back, press the
forward (1) or backward (2) switch and release it once the
seat back is in the desired position.
Otherwise, while not in the seat, fully press and release the
switch to automatically fold (1) the seat into a flat position or
automatically unfold (2) the seat. Lightly press the switch and
release for incremental adjustments.
CAUTION: Before folding seats all the way down,
ensure the seat belt is unbuckled and there are no
objects on the seat or in the footwell. Before unfolding
a seat, make sure that the seat belts are not trapped
behind the seat back.
NOTE: Driving with second row seats folded forward may
increase perceivable noise and/or vibration coming from the
rear of the vehicle (trunk, suspension, etc.).
To allow you to carry long items (such as skis) in the rear of
Model Y, the center seat back can also be independently
folded forward. Pull the handle on the rear of the seat back to
unlatch it, then pull it forward.
WARNING:
When folding the center seat, you must
keep body parts (hands, fingers, etc.) and objects away
from the edges of rear seats. The seat can swing
forward with force and cause injury or damage.
You can also fold the second row seat backs fully forward by
pressing the corresponding switch located on the left side of
the rear trunk. Press the switch again to unfold the seat back.
Front and Rear Seats
36 MODEL Y Owner's Manual
To Next Page
Loading...
