Tesmec PT1250 - Alarm List Description

ALARM LIST DESCRIPTION
ALARM LIST DESCRIPTION Data: 20.10.2017 Pagina: 1 di 5
ID MACHINE DESCRIPTION ALARM OR WARNING
ID520193 Monitor - Card S1 - Can Comunication Fault
ID520194 Monitor - Card S2 - Can Comunication Fault
ID520195 Monitor - Card S3 - Can Comunication Fault
ID520196 Monitor - Card S4 - Can Comunication Fault
ID520197 Monitor - Card S5 - Can Comunication Fault
ID520198 Monitor - Radio Stringing - CanComunicationFault
ID520224 Radio Stringing Receiver - CanComunicationFault
ID520225 Radio Stringing - CanComunicationFault
ID520226 Radio Stringing - Radio Switch Or Joystick Not In Middle Position
ID520227 Radio Stringing - Emergency Push Button Pressed
ID520228 Emergency Push Button Pressed
ID520229 Oil - Temperature Too High
ID520230 Return Oil Filter Obstructed
ID520231 Remote Emergency Push Button Pressed
ID520232 Error on emergency relays
ID520233 Oil - Pressure Too High
ID520234 Over Max Rpm
ID520235 Engine Oil Pressure Too High
ID520236 Engine Water Temperature Too High
ID520237 Connected machines are not of the same model
ID520239 Connection With Machine ID 1 Fault
ID520240 Connection With Machine ID 2 Fault
ID520241 Connection With Machine ID 3 Fault
ID520242 Connection With Machine ID 4 Fault
ID520249 Engine - Error Air Cleaner
ID520250 Engine - Battery Not In Charge
ID520251 Engine - Temperature Too Cold
ID520252 Alarm From Machine Connected - ID 1
ID520253 Alarm From Machine Connected - ID 2
ID520254 Alarm From Machine Connected - ID 3
ID520255 Alarm From Machine Connected - ID 4
ID520256 Warning From Machine Connected - ID 1
ID520257 Warning From Machine Connected - ID 2
ID520258 Warning From Machine Connected - ID 3
ID520259 Warning From Machine Connected - ID 4
ID520260
Stringing
Not Permitted Because Bypass Is Active On Othe
Connected Machine
ID520288 S1 - Eeprom Error
ID520289 S1 - Internal Temperature
ID520290 S1 - Battery Value
ID520298 BW1 Speed Joystick Fault