Tesmec PT1250 - Conductor Diameter; Maximun Force; Sample Ever; Type of Real Time Log

HYDRAULIC PULLER-TENSIONER PT1250
Manual: MI-PT1250-050-01-IT Date: 06.11.2017 Author: AT Page: 33 of 69
Customer
Name constructor or other information.
Operator
Name operator or other information.
Project
Name Project or other information.
Cable type
Type cable or other information.
Maximun Force
Maximum shooting value beyond which an alarm is displayed during printing
Sample Ever
Recording interval expressed in meters.
Conductor Diameter
Diameter or rope conductor.
Type of real time Log
Two printing modes are available:
- OFF: Record only and no snapshot
- BW1: If the printer is connected to the machine and the REC key is pressed, it is
possible to have an instantaneous recording of the recording
READING MANUAL
For a deeper analysis of the usable printer on the puller-tensioner PL1250,
please read carefully the reference manual.
Sub
-
menu EXIT
Exit to Main menu
Data Res
et
Increment and
decrement the
selected
parameter
Pull recorder
parameters setting
PLUG FOR
CONNECTION TO
PRINTER