Tesmec PT1250 - Electronic Connection and Automatic Syncronize System

HYDRAULIC PULLER-TENSIONER PT1250
Manual: MI-PT1250-050-01-IT Date: 06.11.2017 Author: AT Page: 56 of 69
6.1.2 ELECTRONIC CONNECTION AND AUTOMATIC SYNCRONIZE SYSTEM
When using connected machines, the following controls effect on all machines when operated from the
MASTER machine:
• Speed control (Joystick);
• Pull-adjusting control (potentiometer);
• Rope-clamp selector
• Switch syncronizer;
When using connected machines, the following controls must be operated on each single machine
(SLAVE):
• Reel-winder working pressure
• Reset of meter counter (between display);
• Main front plough position (between menù on display);
Joystick speed
control
Rope
clamp
Pull force
value
Syncronizer
switch
Reel winder pressure
control