HYDRAULIC PULLER-TENSIONER PT1250
Manual: MI-PT1250-050-01-IT Date: 06.11.2017 Author: AT Page: 46 of 69
5.6 MACHINE STARTING
ATTENTION: Before starting the work and turn on the diesel engine, check that
the key off the battery is inserted and turned to the ON position (Tav.4 pos.1).
a. Turn the key consensus starter machine positioned on the panel of the power unit. (tab.8 pos.2)
b. Operate from the remote control of the machine (tab. 3).
In the 7 " screen of the remote control, you see the loading and setting of the list of controlled
parameters for the maintenance of the machine.
The screen shown here to the side, alerts the
operator of the need to perform performing
maintenance and control.
In the screen “extraordinary settings“, it is
possible to see which control will be needed
c. Connect the machine radio control as described in chapter 5.4.
d. Position centrally the control lever of the variable displacement pump located on the remote control
(tab. 9, pos.5).
e. Via the switch on the panel, turn on the diesel engine.
To Next Page
Loading...
