Tesmec PT1250 - Electronic Card Input and Output PIN Status; Maintenance Parameters; Sub-Menu Electronic Cards Inputs Status - Virtual Radio Control

HYDRAULIC PULLER-TENSIONER PT1250
Manual: MI-PT1250-050-01-IT Date: 06.11.2017 Author: AT Page: 38 of 69
5.5.2.4 Maintenance Parameters
• Sub-menu Electronic Cards inputs status - Virtual Radio Control
This menu allows you to view the list and status of PIN inputs or outputs of the electronic cards that is
attached to the machine. In case of emergency, reported errors or faults, the operator has the possibility
to monitor the electronic state of the machine with an immediate reference to the hydraulic and electrical
diagrams.
Electronic card input and output PIN status
PIN output or input enabled and working properly
PIN output or input in card NOT managed
PIN output or input enabled and not working. Hardware problem detected.
PIN output or input NOT enables. Hardware problem detected.
PIN output or input NOT enabled. No Hardware Error detected.
ATTENTION: In case of electronic or hydraulic system malfunction, please
contact your service agency Tesmec.
The screen described here, can be used by customer service Tesmec, to
monitor the status of the inputs and outputs as a result of electronic
malfunctions detected.
Downwards scroll
Nr. Electronic Card
Selection
Main control circuit via
the negative pressure
brake closing.
Input or output state in
card
Initials or hydraulic solenoid valve.
Refer to a hydraulic or electrical diagram
PIN type
electronic card
AUX control circuit via the
negative pressure brake
closing.