HYDRAULIC PULLER-TENSIONER PT1250
Manual: MI-PT1250-050-01-IT Date: 06.11.2017 Author: AT Page: 25 of 69
5. If the operator need to disconnect the remote control, rotate the switch to OFF position.
WARNING
When the remote control loses communication with the receiver, the machine
will stop immediately if it is working as ARGAN.
If the machine is configured as a BRAKE, the bull-wheel will continue to move,
but there will be an audible alarm, which will signal the connection to the
machine.
To reconnect the radio control, simply repeat the above points.
On the radio control is a lateral button: This button allows the operator to rotate the gantry holding closed
the negative brake circuit of the bull-wheel.
This command can be useful when loading or unloading the reel from the stands or during the rope
loading operations on the machine.
Button for the management of
the reel elevator, separately
from the bull-wheels circuit.
To Next Page
