www.ti.com
bq77910A Circuit Module Physical Construction
Table 12. Resistor Simulator Bill of Materials (continued)
Count Reference Design Value Description Size Part Number Manufacturer
2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with equivalent MFG's components.
37
SLUU855–February 2012 bq77910AEVM
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
To Next Page
Loading...
