Texas Instruments TI-83 - Naming Lists

Lists 11-3
8311LIST.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 1:21 PM Printed: 02/19/01 1:37 PM
Page 3 of 18
The TI
-
83 has six list names in memory: L
1
, L
2
, L
3
, L
4
, L
5
,
and
L
6
. The list names L
1
through L
6
are on the keyboard
above the numeric keys
À
through
¸
. To paste one of
these names to a valid screen, press
y
, and then press
the appropriate key.
L
1
through L
6
are stored in stat list
editor columns
1 through 6 when you reset memory.
To create a list name on the home screen, follow these steps.
1. Press
y
[
{
], enter one or more list elements, and then
press
y
[
}
]. Separate list elements with commas. List
elements can be real numbers, complex numbers, or
expressions.
2. Press
¿
.
3. Press
ƒ
[
letter from A to Z or
q
] to enter the first
letter of the name.
4. Enter zero to four letters,
q
, or numbers to complete the
name.
5. Press
Í
. The list is displayed on the next line. The
list name and its elements are stored in memory. The
list name becomes an item on the
LIST NAMES
menu.
Note:
If you want to view a user-created list in the stat list editor,
you must store it in the stat list editor (Chapter 12).
You also can create a list name in these four places.
•
At the
Name= prompt in the stat list editor
•
At an
Xlist:, Ylist:, or Data List: prompt in the stat plot
editor
•
At a
List:, List1:, List2:, Freq:, Freq1:, Freq2:, XList:, or
YList: prompt in the inferential stat editors
•
On the home screen using
SetUpEditor
You can create as many list names as your TI
-
83 memory
has space to store.
Naming Lists
Using TI-83 List
Names L
1
through L
6
Creating a List
Name on the
Home Screen