Texas Instruments TI-83 Guide Book

19-8 Communication Link
8319LINK.DOC TI-83 Intl English, Chap 19 Bob Fedorisko Revised: 02/19/01 1:24 PM Printed: 02/19/01 1:40 PM
Page 8 of 10
The only data type you can transmit from a TI
-
83 to a TI
-
82
is list data stored in
L
1
through L
6
.
To transmit to a TI
-
82 the list data that is stored to TI
-
83
lists
L
1
, L
2
, L
3
, L
4
, L
5
, or L
6
, follow these steps.
1. Set the TI
-
82 to receive (page 19
.
5).
2. Press
y
[
LINK
] 5 on the sending TI
-
83 to select
5:Lists to TI82. The
SELECT
screen is displayed.
3. Select each list to transmit.
4. Press
~
to display the
LINK TRANSMIT
menu.
5. Confirm that the receiving unit is set to receive
(page 19
.
5).
6. Press
Í
to select
1:Transmit and begin transmitting.
Note:
If dimension > 99 for a TI
-
83 list that is selected to send, the
receiving TI
-
82 will truncate the list at the ninety-ninth element during
transmission.
Transmitting Lists to a TI-82
Transmitting
Lists to a TI-82

Texas Instruments TI-83 Specifications

General

Programming	TI-BASIC
Processor	Zilog Z80, 6 MHz
Weight	7.4 oz (210 g)
Display	96x64 pixels, monochrome LCD
Power Source	4 AAA batteries, 1 CR1616 or CR1620 for backup
Memory	32 KB RAM
Connectivity	2.5mm I/O port for linking with other TI calculators