Texas Instruments TI-83 Guide Book

11-16 Lists
8311LIST.DOC TI-83 international English Bob Fedorisko Revised: 02/19/01 1:21 PM Printed: 02/19/01 1:37 PM
Page 16 of 18
Matr
4
list( (matrix stored to lists) fills each
listname
with
elements from each column in
matrix
. If the number of
listname
arguments exceeds the number of columns in
matrix
, then
Matr
4
list( ignores extra
listname
arguments.
Likewise, if the number of columns in
matrix
exceeds the
number of
listname
arguments, then
Matr
4
list( ignores
extra
matrix
columns.
Matr
4
list(
matrix
,
listname1
,
listname2
, . . . ,
listname n
)
&
Matr
4
list( also fills a
listname
with elements from a
specified
column#
in
matrix
. To fill a list with a specific
column from
matrix
, you must enter a
column#
after
matrix
.
Matr
4
list(
matrix
,
column#
,
listname
)
&
Ù
preceding one to five characters identifies those
characters as a user-created
listname
.
listname
may
comprise letters,
q
, and numbers, but it must begin with a
letter from A to Z or
q
.
Ù
listname
Generally,
Ù
must precede a user-created list name when
you enter a user-created list name where other input is
valid, for example, on the home screen. Without the
Ù
, the
TI
-
83 may misinterpret a user-created list name as implied
multiplication of two or more characters.
Ù
need not precede a user-created list name where a list
name is the only valid input, for example, at the
Name=
prompt in the stat list editor or the Xlist: and Ylist: prompts
in the stat plot editor. If you enter
Ù
where it is not
necessary, the TI
-
83 will ignore the entry.
Matr
4
list(

Texas Instruments TI-83 Specifications

General

Programming	TI-BASIC
Processor	Zilog Z80, 6 MHz
Weight	7.4 oz (210 g)
Display	96x64 pixels, monochrome LCD
Power Source	4 AAA batteries, 1 CR1616 or CR1620 for backup
Memory	32 KB RAM
Connectivity	2.5mm I/O port for linking with other TI calculators