Getting Started 15
settings. When the TI-89 Titanium is turned off, the Constant Memory™ feature retains
all of the mode settings you have selected.
To view the TI-89 Titanium mode settings:
1. Press 3. Page 1 of the MODE dialog box appears.
2. Press „ or … to display the modes listed on Page 2 or Page 3.
Note: Modes that are grayed out are available only if other required mode settings are
selected. For example, the Custom Units mode listed on Page 3 is available only if the
Unit System mode is set to CUSTOM.
Viewing mode settings
Press Result
3
ã„
To Next Page
Loading...
