Texas Instruments TI-89 Titanium User Manual

Operating the Calculator 181
3. Move the 8 indicator to the command, and press ¸.
Note: From the top of the list, press C to move to the bottom. From the bottom, press D
to move to the top.
Information about Parameters
For the command indicated by 8, the status line shows the required and optional
parameters, if any, and their type.
Ê
Indicated command and its parameters
Ë Brackets [ ] indicate optional parameters
To move the
8 indicator:
Press or type:
One function or program at a time
D or C
One page at a time
2 D or 2 C
To the first function that
begins with a specified letter
The letter key. (On the TI-89
Titanium, do not press
j first. If
you do, you need to press
j or
2 ™ again before you can
type a letter.)
Ê
Ë

Texas Instruments TI-89 Titanium Specifications

General

Display Type	LCD
Display Resolution	160 x 100 pixels
CPU	Motorola 68000
CPU Speed	16 MHz
RAM	256 KB
Flash ROM	2.7 MB
Programming Language	TI-BASIC, Assembly
Power Source	4 AAA batteries
Connectivity	I/O port
Dimensions	7.5 x 3.5 x 1 inches